2013年11月12日星期二

Vamo V2 e cigarette kit 3-6V Varies Voltage eGo APV V2 E-Cigarette


                         Contact:sales@crown-ecigarette.com





                       Contact:sales@crown-ecigarette.com
           Website: http://www.china-ecigarette.com/
                               http://www.crown-ecigarette.com/ 
                               http://www.ecigarette-china.com/


Kits contain
2 pcs ce4 atomizer
2 pcs battery
1 pc vamo main body
1 pc charger
1 pc gift box
1 pc manual
Specification
Battery capacity:900/1800/2200mah
Battery type:18350/18650
Compitiable with:CE4/CE5+/CE6/VIVI NOVA,DCT
Working voltage:3~6v
Function:measure and display resistance,volt and watt
Battery life:300times
Main Feature,
1.ajust working voltage +/-0.1v from 3v to
6v pressing button
2.display the resistance of the
atomizer,0perate voltage,power
3.Three operating keys,36 speed power
optional.
4.Test the actual resistance of atomizer
5.Reverse battery protection
6.body is separable,working with 2
pcs18350,or 1 pc18350 or 1pc
18650battery
7.510/ego thread.
Safety system of vamo :
1.super low quiescent current protection 
2.Reverse battery protection
3.over-current protection
4.short circuit/atomizer protection
5.warning against low voltage
6.vent hole get rid of discharge

How to use vamo :
1.When the control panel is in standby , keep pressing power button 5 clicks , it will turn on. 
When the control panel is switched, keep pressing power button 5 clicks,it will turn off. 
2. when the control panel is switched, keep pressing "-" for 3 seconds, the LCD  screen display
 the Remaining voltage. At this time, adjusting the working volt 0.1V each time by pressing
 "+" and "-" buttons.(3.0V-6.0V)
3.when the control panel is switched , keep pressing "+" for 3 seconds , the LCD screen display
 the resistance of atomizer. At this time, adjusting the working volt 0.1V each time by pressing
 "+" and "-" buttons.(3.0V-6.0V)
4.when the control panel is switched, keep pressing "+" and "-" at the same time for 5 seconds,
 the LCD screen display the working wattage. At this time , adjusting the working wattage 
0.5w
 each time by pressing "+" and "-" buttons.(3.0W-15.0W)
5.when the working resistance is under 1.2 ohm, pressing the power button, the LCD screen
 display Lo-Ω
6.if using one 18350 battery, when the remaining voltage is under 3.2V, the LCD screen display
 Lo V; if using two 18350 batteries, when the remaining voltage is under 6.4V, the LCD screen 
display

没有评论:

发表评论